Circuit Breaker - Kodak X-Omat 480 RA Processor Installation Instructions Manual

Operating the Processor at 50 Hz
The PROCESSOR is shipped for 60
Hz operation. Do the following
procedure for 50 Hz operation. If the
Japanese language is a requirement,
also see ''Changing to the Japanese
Language'' on page ??.
Dangerous Voltage
[1] Move the wall power switch to the ''OFF''
position.
[2] Move the MAIN CIRCUIT BREAKER CB1 and
AUXILIARY CIRCUIT BREAKERS CB2, CB3,
and CB4 to the ''O'' position.
[3] Remove the FEED-END MIDDLE ACCESS
PANEL from the PROCESSOR.
[4] Remove the BLOWER MOTOR COVER.
1C0932
NOTE
MAIN

CIRCUIT BREAKER

CB1
AUXILIARY CIRCUIT BREAKERS
CB2, CB3, and CB4
Figure 34 Deenergizing the Processor
BLOWER MOTOR
COVER
H108_0125CCB
H108_0125CA
29