Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 91

Performing the IR HotSync
2
Click the HotSync
and select Setup from the HotSync Manager shortcut
menu.
The Setup window is displayed.
3
Click the Local tab.
4
Adjust the following settings as needed.
• Serial port: Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to the Infrared Monitor in the
Windows Control Panel.
• Speed: Determines the speed at which data is transferred. Try the As
Fast As Possible rate first, and adjust downward if you have any
problems.
5
Tap OK.
The IR HotSync
Note
When performing the local HotSync
after you set for the IR HotSync
settings.
b
For details, refer to "To restore the local HotSync settings" on page 92.
Exchanging and updating data using the HotSync
®
HotSync operations)
®
operation
icon in the Windows task tray again
®
operation is enabled.
®
operation with the USB cable and plug adapter
®
operation, you need to restore the local HotSync
®
Continued on next page
operation (Other 91