Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 41

®
Using Graffiti
5
Lift the stylus from the screen at the end of the
stroke shape.
When you lift the stylus from the screen, your CLIÉ
handheld recognizes your stroke immediately and prints the
character at the insertion point on the screen.
As soon as you lift the stylus from the screen, you can begin
another stroke for the next character you want to write.
Note
You must begin the character strokes in the Graffiti writing area. If
you do not draw Graffiti strokes in the Graffiti writing area, your
CLIÉ handheld does not recognize them as characters.
Notes on entering Graffiti
• Recognition accuracy improves when you draw your strokes
that nearly fill in the Graffiti writing area.
• Draw your strokes at natural speed. Drawing too slowly may
generate recognition errors.
• Do not draw your strokes on a slant. Vertical strokes should be
parallel to the vertical lines of the Graffiti writing area.
Entering data on your Sony CLIÉ™ handheld
writing to enter data
®
writing
41