Performing the HotSync
6
Connect your CLIÉ handheld to your computer and perform
the HotSync
The computer information (Primary PC name and Primary PC address (IP
address)) is transferred to your CLIÉ handheld.
When you perform the HotSync
handheld identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync
operation via the LAN.
1
Rotate the Jog Dial™ navigator to select [HotSync] icon on
the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2
Tap Local.
3
Tap the Menu
4
Tap LANSync Prefs from the Options menu.
The LANSync Preferences screen is displayed.
5
Tap LANSync.
Exchanging and updating data using the HotSync
®
HotSync
operations)
®
operation via LAN (LANSync)
®
operation.
®
operation via LAN, your CLIÉ
icon.
Continued on next page
®
operation (Other
®
105