Performing the HotSync
(LANSync)
To perform the LANSync, you must have network administrator skills.
Consult a network administrator prior to setting LANSync.
You can perform the HotSync
another computer connected to your CLIÉ handheld.
Prior to performing the LANSync operation
Verify the following.
• The Palm™ Desktop for CLIÉ software is installed in both computers
connected by the LAN.
• Your CLIÉ handheld is properly connected to the USB cable and plug
adapter.
Preparing your computer
1
Click the HotSync
select Network from the HotSync Manager shortcut menu.
2
Click the HotSync
and select Setup from the HotSync Manager shortcut
menu.
The Setup dialog box is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
5
Click OK.
Exchanging and updating data using the HotSync
®
HotSync
operations)
®
operation via LAN
®
operation via LAN between your computer and
LANSync via LAN
LAN
icon in the Windows task tray and
icon in the Windows task tray again
®
operation (Other
Your computer
Continued on next page
104