Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 47

Performing the HotSync
This section explains how to perform the HotSync
assuming that you have performed all the necessary preparations
and installations for your CLIÉ handheld and your computer.
b
For details on how to prepare for the HotSync
procedure in "Setting up your Sony CLIÉ™ handheld" in "Read This
First (Operating Instructions)."
Performing the HotSync
cable (Local HotSync
Performing the HotSync
plug adapter is called a Local HotSync
1 Connect your CLIÉ handheld to your computer
with the USB cable.
2 Rotate the Jog Dial™ navigator to select
[HotSync] icon on the Application Launcher
screen and press the Jog Dial™ navigator.
The HotSync
Tip
You can also tap [HotSync] icon to start the HotSync
3 Tap the HotSync
screen.
The HotSync
When the HotSync
showing the HotSync
CLIÉ handheld.
Exchanging and updating data using the HotSync
®
operation with the USB
®
)
®
operation with the USB cable and
®
operation starts.
icon on the HotSync
®
operation starts.
®
operation is complete, the message
®
completion is displayed on your
®
®
operation
®
operation
®
operation, follow the
®
.
®
Continued on next page
operation
operation.
47