Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 81

Changing the Network preferences
Send Password
Delay
Get IP
Prompt
End
4
Repeat step 3 until the log-in script is complete.
5
Tap OK.
The Details screen is displayed.
6
Tap OK.
The Network Preferences screen is displayed.
Customizing your Sony CLIÉ™ handheld (Preferences)
Transmits the password entered in the Password field of
the Network Preferences screen. If you did not enter
a password, this command prompts you to enter one. The
Password command is usually followed by a Send CR
command.
Tells your CLIÉ handheld to wait a specific number of
seconds before executing the next command in the log-in
script.
Reads an IP address and uses it as the IP address for your
CLIÉ handheld. This command is used with SLIP
connections.
Opens a dialog box and prompts you to enter text of
some kind (for example, a password or a security code).
Identifies the last line in the log-in script.
81