Sony PEG-SJ33 CLIE Handbook (primary manual) Handbook page 106

Performing the HotSync
6
Tap OK.
The HotSync screen is displayed.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your
computer's settings, CLIÉ handheld setting and Conduit Setup. Turn on the
computers and start HotSync
Note
To perform the LANSync operation, both computers are required to be set for the
LANSync. On each computer, click the HotSync
and make sure that Network in the HotSync Manager shortcut menu is selected. If
not, click Network to select.
1
Rotate the Jog Dial™ navigator to select [HotSync] icon on
the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2
Tap the HotSync
The HotSync
The message will be displayed to note that the HotSync
complete.
Exchanging and updating data using the HotSync
®
HotSync operations)
®
operation via LAN (LANSync)
®
Manager.
icon.
®
operation starts.
icon in the Windows task tray
®
operation is
®
operation (Other 106