Shutting Down The Projector; Power - BenQ MP776 User Manual

Shutting down the projector

Shutting down the projector

Shutting down the projector Shutting down the projector
1. Press
display prompting you.
If you don't respond in a few seconds, the
message will disappear.
2. Press
indicator light flashes orange, the projection lamp indicator light indicator light indicator light
shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the
projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
To shorten the cooling time, you can also activate the Quick cooling function. See
Cooling" on page 49
3. Once the cooling process finishes, a "Power Off Ring
Tone" will be heard. The POWER indicator light Tone
Tone Tone
steady orange and fans stop. Disconnect the power
cord from the power outlet.
• To turn off the power ring tone, see
Power on/off ring tone" on page 39
• If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press
again to start the projector after the fans stop and the
POWER indicator light turns orange.
Power and a confirmation message will

Power

Power Power
Power a second time. The POWER Power Power Power
for details.
POWER indicator light is a
POWER indicator light POWER indicator light
POWER POWER POWER
Power Off Ring
Power Off Ring Power Off Ring
"Turning off the
for details.
Power
"Quick
Operation 43