Connecting A Computer Or Monitor - BenQ MP776 User Manual

Connecting a computer or monitor

Connecting a computer or monitor
Connecting a computer or monitor Connecting a computer or monitor
Connecting a computer Connecting a computer
Connecting a computer Connecting a computer
The projector can connect to both IBM® compatibles and Macintosh® computers. A Mac
adapter (an optional accessory) is needed if you are connecting legacy version Macintosh
computers.
To connect the projector to a notebook or desktop computer: To connect the projector to a notebook or desktop computer:
To connect the projector to a notebook or desktop computer: To connect the projector to a notebook or desktop computer:
1. Take the supplied VGA cable and connect one end to the D-Sub output jack of the
computer.
2. Connect the other end of the VGA cable to the COMPUTER 1
signal input jack on the projector.
3. If you wish to make use of the projector (mixed mono) speakers in your presentations,
take a suitable audio cable and connect one end of the cable to the audio output jack of
the computer, and the other end to the AUDIO
4. If you wish and the AUDIO OUT
another suitable audio cable and connect one end of the cable to the AUDIO OUT
jack of the projector, and the other end to your external speakers (not supplied).
Once connected, the audio can be controlled by the projector On-Screen Display
(OSD) menus. See
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook's documentation to
find your notebook's key combination.
Connecting a monitor Connecting a monitor Connecting a monitor Connecting a monitor
If you want to view your presentation close-up on a monitor as well as on the screen and the
MONITOR OUT jack is available on your projector, you can connect the MONITOR OUT MONITOR OUT MONITOR OUT MONITOR OUT
signal output jack on the projector to an external monitor following the instructions below:
To connect the projector to a monitor: To connect the projector to a monitor:
To connect the projector to a monitor: To connect the projector to a monitor:
1. Connect the projector to a computer as described in
19.
2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the
D-Sub input jack of the video monitor.
Or if your monitor is equipped with a DVI input jack, take a VGA to DVI-A cable and
connect the DVI end of the cable to the DVI input jack of the video monitor.
3. Connect the other end of the cable to the MONITOR OUT
• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER
1 jack.
• If you wish to use this connection method when the projector is in standby mode, make
sure the Standby Monitor Out function is turned on in the SYSTEM SETUP: Advanced
menu. See
AUDIO OUT jack is available on your projector, you can use
AUDIO OUT AUDIO OUT
"Audio Settings" on page 49
"Standby Monitor Out" on page 50
COMPUTER 1 or COMPUTER 2
COMPUTER 1 COMPUTER 1
AUDIO or AUDIO (L/R) AUDIO (L/R) jack of the projector.
AUDIO AUDIO AUDIO (L/R) AUDIO (L/R)
for details.
"Connecting a computer" on page
MONITOR OUT jack on the projector. MONITOR OUT MONITOR OUT
for details.
COMPUTER 2
COMPUTER 2 COMPUTER 2
AUDIO OUT
AUDIO OUT AUDIO OUT
MONITOR OUT MONITOR OUT MONITOR OUT
Connection 19