Magnifies Or Reduces The Projected Image Size; Wall Color; Aspect Ratio; Digital Zoom - BenQ MP776 User Manual

Description of each menu Description of each menu
Description of each menu Description of each menu
Function
(Default setting/value)

Wall Color

(Off)

Aspect Ratio

(Auto)
Auto
Keystone
(On)
Keystone
(0)
Position
(0)
Phase
(depends on the
selected input
signal)
H. Size
(0)

Digital Zoom

(1.0X)

Picture Mode

(Presentation)
Reference
Mode
(Dynamic)
Brightness
(50)
Contrast
(0)
Corrects the projected picture's color when the projection surface is not
white. See "Using Wall Color" on page 32
There are four options to set the image's aspect ratio depending on
your input signal source. See
details.
Automatically corrects any keystoning of the image. See
keystone" on page 28
Corrects any keystoning of the image. See
page 28 for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC
signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 30
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 32
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
details.
Adjusts the brightness of the image. See
33 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 33
Description
for details.
"Selecting the aspect ratio" on page 30
for details.
"Correcting keystone" on
for details.
for details.
"Setting the User 1/User 2 mode" on page 32
"Adjusting Brightness" on page
for details.
"Correcting
"Magnifying and
"Selecting a
for
Operation
for
47