Troubleshooting - BenQ MP776 User Manual

Benq mp776: user guide
Hide thumbs Also See for MP776:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting
Troubleshooting
Troubleshooting
The projector does not turn on.
The projector does not turn on.
The projector does not turn on.
The projector does not turn on.
There is no power from the power
cord.
Attempting to turn the projector on
again during the cooling process.
No picture
No picture
No picture
No picture
The video source is not turned on or
connected correctly.
The projector is not correctly
connected to the input signal device.
The input signal has not been
correctly selected.
The lens cover is still closed.
Blurred image
Blurred image
Blurred image
Blurred image
The projection lens is not correctly
focused.
The projector and the screen are not
aligned properly.
The lens cover is still closed.
Remote control does not work
Remote control does not work
Remote control does not work
Remote control does not work
The batteries are out of power.
There is an obstacle between the
remote control and the projector.
You are too far away from the
projector.
The password is incorrect
The password is incorrect
The password is incorrect
The password is incorrect
You do not remember the password.
Cause
Cause
Cause
Cause
Cause
Remedy
Plug the power cord into the AC power jack on
the projector, and plug the power cord into the
power outlet. If the power outlet has a switch,
make sure that it is switched on.
Wait until the cooling down process has
completed.
Remedy
Turn the video source on and check that the
signal cable is connected correctly.
Check the connection.
Select the correct input signal with the
SOURCE key on the projector or remote
control.
Open the lens cover.
Remedy
Adjust the focus of the lens using the focus
ring.
Adjust the projection angle and direction as
well as the height of the projector if necessary.
Open the lens cover.
Remedy
Replace the batteries with new ones.
Remove the obstacle.
Stand within 8 meters (26 feet) of the
projector.
Remedy
Please see
"Entering the password recall
procedure" on page 27
for details.
Troubleshooting
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp777

Table of Contents