Jonsered FR13 Workshop Manual page 22

5
Remove the fuel line hose clamp from the fuel
pump and pull the fuel line downwards.
6
Release the exhaust pipe clamps, and then remove
the exhaust pipe.
7
Clamp together the wire holder under the engine
pulley with a pair of flat pliers and pull the wire
holder downwards.
8
Insert tool no. 506 79 06-01 into the centre of the
engine pulley. Unscrew and remove the socket
head cap screw which holds the pulley and the
engine axle together. Use tool no. 506 89 92-01 as
a holder-on. Remove the pulley from the engine
axle.
9
Remove the engine attachments, two on each side
of the engine, and remove the engine from the
mower.
Reparation instructions
21
English –