Automatic Transmission - Ford MUSTANG MACH 1 2021 Supplement Manual

Table of Contents

Advertisement

E344226
If reverse (R) is not fully engaged, press
the clutch pedal down and return the
gearshift to the neutral position. Release
the clutch pedal for a moment, then raise
the collar and shift to reverse (R) again.
Note: Make sure that your vehicle is at a
complete stop before you shift into reverse
(R). Failure to do so could damage the
transmission.
Note: The gearshift lever can only be
moved to reverse (R) by raising the collar
below the gearshift knob up before shifting
to reverse (R). This is a lockout feature
which protects the transmission from
accidentally engaging reverse (R) when
intending to select first (1).
Parking Your Vehicle
WARNING: Always set the parking
brake fully and make sure you shift the
gearshift lever to first gear. Switch the
ignition off and remove the key whenever
you leave your vehicle.
To park your vehicle:
1.
Apply the brake and shift into the
neutral (N) position.
2. Fully apply the parking brake, hold the
clutch pedal down, then shift into first
(1).
Mustang (CZG) Mach 1, enUSA, First-Printing
Transmission
3. Turn the ignition off.
After you have turned the engine off, you
can release the clutch pedal.

AUTOMATIC TRANSMISSION

(IF EQUIPPED)
parking brake and make sure you shift
into park (P). Failure to follow this
instruction could result in personal injury
or death.
pedal and accelerator pedal
simultaneously. Applying both pedals
simultaneously for more than a few
seconds will limit engine performance,
which may result in difficulty maintaining
speed in traffic and could lead to serious
injury.
Note: You may not be able to shift out of
park (P) unless the intelligent access key is
inside your vehicle.
Understanding the Positions of
Your Automatic Transmission
Putting your vehicle in gear:
1.
Fully press down on the brake pedal.
2. Press and hold the button on the top
of the gearshift lever.
3. Move the gearshift lever into the
desired gear.
4. Release the button and your
transmission remains in the selected
gear.
20
WARNING: Always fully apply the
WARNING: Do not apply the brake

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents