Usage - Razor E PRIME AIR Owner's Manual

USAGE

How to Ride
Do not activate the thumb throttle unless you are on the E Prime Air and in a safe, outdoor environment suitable for
riding.
Put kickstand up.
Press the power button (A), the LEDs will light up.
Get on the scooter and place both hands on the handlebars. Kick to start (B), and then press down on the thumb
throttle (C).
A
How to Stop
For controlled stops, apply the brake by pressure on the rear-fender brake or electronic brake (on handlebar).
Razor recommends that you practice applying the brake options at various speeds and in an open area free from
obstructions before riding your scooter around others.
Option 1 - Press the electronic brake (on handlebar), the power will cut off and then product will slow to a stop.
Option 2 - Step on the rear-fender brake, the power will cut off and then product will slow to a stop.
OPTION 1
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
C
8
B
OPTION 2
Note: Electric scooter must
be moving at least 3 mph
(5 km/h) while engaging
throttle to engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when either
brake option is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and throttle is
applied before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.