Usage - Razor Power A Owner's Manual

USAGE

How to Ride
Turn power switch "ON"; put kickstand up and place both hands on the handlebars.
Place one foot on the deck plate and with the other foot, push (kick to start) scooter while pressing the push- button
throttle. Place other foot on deck plate once motor has engaged.
Note: Lighted front wheel will light up when wheel is in motion.
How to Stop
For controlled stops, release the throttle and apply the brake by putting pressure on the rear-fender brake. Razor
recommends that you practice applying the brake at various speeds and in an open area free from obstructions
before riding your scooter around others.
6
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while pressing the push-button
throttle to engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when brake
is applied.
Note: Motor will re-engage,
(without having to kick to start),
if brake is released and push-
button throttle is pressed before
scooter has slowed down to under
3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.