Usage - Razor ECOSMART CARGO Owner's Manual

USAGE

headline
How to Operate
Do not activate the twist-grip throttle unless you are on the electric scooter and in a safe, outdoor environment suitable for riding.
The throttle can be activated as soon as the power button turns the product on.
How to Ride
Once you have inflated the tires (see page 5) and charged the battery (see page 7):
1. Move EcoSmart Cargo slightly forward to retract center stand.
2. Turn power "ON" by pressing the power button (A) for two seconds. The display will light up.
3. Sit on the front seat of the EcoSmart Cargo with both feet on the ground on either side of the deck to balance the electric scooter.
4. Place both hands on the handlebars.
5. Place one foot on deck plate. Twist the throttle with right hand (B). Place other foot on deck plate once scooter is in motion.
Note: Keep both feet on the deck while the EcoSmart Cargo is in motion.
Headlight and Taillight: To activate the headlight and taillight the product must be powered ON. Press the light button (C) once to activate the
headlight and taillight. To deactivate the headlight and taillight, press the light button once again.
Power Button (A)
Light Button (C)
How to Use Passenger Seat
RAZOR RECOMMENDS ADULT PASSENGERS ONLY: This scooter product is not as large or as stable as things like cars or motorcycles. It is
important that passengers do not interfere with balance or with rider control. Razor therefore recommends that passengers be mature and capable
adults who understand the importance of these facts and can moderate their riding practices to avoid and prevent interference with safe operation
of the EcoSmart Cargo scooter.
• Riders controlling the electric scooter should never sit on the passenger (rear) seat while riding. Electric scooter should only be controlled by rider
sitting in the front seat.
• Passenger must keep both feet on foot pegs while electric scooter is in motion.
A C
9 9
B