Assembly And Set-Up - Razor E PRIME AIR Owner's Manual

ASSEMBLY AND SET-UP

Unfolding the Scooter for First Time Use
Note: Remove plastic covers on rear axle bolt before unfolding scooter.
Discard plastic covers.
1
To release the folding mechanism, place the scooter
on the ground. Pull the Anti-Rattle knob up to raise
T-bar. Turn knob completely counterclockwise then
continuing raising T-bar until T-bar is locked in the
upright position.
Note: To activate the Anti-Rattle feature, turn the knob clockwise. Note there is no need to overtighten.
To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up the Anti-Rattle knob to
release the folding mechanism. For instructions on folding see page 9.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
2
Turn knob clockwise to tighten and engage the Anti-
Rattle mechanism.
4
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter. Make sure others are
standing clear.