Device Description - Milwaukee M18 HUP700R User Manual

1
2
3
4
5
14
16
15
7
8

Device description

1. Cutting Mode Button
2. Crimp Mode Button
3. Manual pressure release button
4. Coupler
5. Coupler Swivel
6. Wireless Mode Button
7. Oil Reservoir Bright line
8. Battery Bay
9. Oil Cap
10. Cord Wrap
11. Vent Plug
12. Handle
13. Retract Button
14. Advance Button
15. Cord
16. Remote
24
English
6
13
12
9 10 11
24
LED indicator
Solid Green
Solid Red
Flashing Red / Green
(after Solid Green or Solid
Red)
NOTE: If the indicator shows red, check the oil
levels and ensure that there are no leaks in the
attachments. Confirm that all connections are secure
and the attachments are proper for the job. Operate
the product again. If the problem persists, return the
product to a MILWAUKEE service facility.
To operate in wireless mode:
1. Depressurize the tool by holding down the manual
pressure release button for 5 seconds.
2. Connect the hose coupler to the pump coupler.
3. Connect the tool head to the hose.
4. Insert the battery pack.
5. Disconnect the remote from the cable, and remove
it from the pump.
6. Press the wireless mode button
The beacon light flashes red.
7. On the remote, turn on the wireless power switch
.
The bluetooth light fl ashes blue, then turns solid
when connected.
Defi nition
The product
completed the
operation and
reached full crimping
pressure.
The product
completed the
operation but did not
reach full crimping
pressure.
The product has
reached its service
interval (20000
crimps). Red/Green
fl ashing begins
after the solid Red
or Green indicator
for the operation is
displayed.
MILWAUKEE
recommends that the
product be inspected
and preventative
maintenance must
be completed.
on the pump.