Additional Safety Rules; Functional Description; Specifications - Milwaukee M18 TP Operator's Manual

• When servicing a pump, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorised parts or failure to follow maintenance
instructions may create a risk of electrical shock or
injury and may void the warranty.
• Do not modify or attempt to repair the pump
or the battery pack except as indicated in the
instructions for use and care.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.

ADDITIONAL SAFETY RULES

•
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
•
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
This appliance can be used by children aged from 8
•
years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the
hazards involved.
•
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
•
by children without supervision.
®
service facility for a

FUNCTIONAL DESCRIPTION

1. Outlet
2.
3. Handle
4. Battery compartment button
5. Battery compartment
6. On/Off button
7. Inlet
3
2
1

SPECIFICATIONS

Cat. No. .......................................................M18 TP
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Max Flow Rate....................................... 30.3 L/min
Fittings ..........................
Max Lift ....................................................5.5 m (18')
Max Head Height ......................................23 m (75')
Application
Max Water Temperature ................. 60°C (140°F)
Max Air Temperature ...................... 40°C (104°F)
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
L/min
Litres per Minute
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
3
5
4
7
13 mm (1/2") NPT male to
19 mm (3/4") BSPT Male
6