Specifications; Removing/Inserting The Battery; Functional Description - Milwaukee FORCE LOGIC M18 HUP700R Operator's Manual

10,000 psi hydraulic pump
Hide thumbs Also See for FORCE LOGIC M18 HUP700R:
Table of Contents

Advertisement

1
2
3
6
7
8
SYMBOLOGY
V
Volts
Direct Current
WARNING
shock andproperty damage, work on
deenergized lines when possible. Tool
is not insulated. Should work on
energized lines be required, ensure all
proper precautions, including those
contained in NFPA 70E, have been
taken first.
Read operator's manual.
Wear safety goggles.
Danger of compression injury
Ingress Protection
IP54
Do
not
batteries/rechargeable
together with household waste material.
Electric tools and batteries that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility. Check with your local authority
or retailer for recycling advice and
collection point.
Regulatory Compliance mark (RCM).
This
product
regulatory requirments.

FUNCTIONAL DESCRIPTION

10
12
13
14
5
16
4
17
9
18
19
To reduce the risk of
arc
flash,
electric
dispose
electric
batteries
meets
applicable
11
15
24
23
22
21
20
Cat. No. .......................................... M18 HUP700R
Volts.......................................................... 18 V DC
Battery Type .................................................M18™
Charger Type................................................M18™
Operating Pressure
...............................10,000 psi max. (700 bar max.)
Ingress Protection............................................ IP54
Recommended Ambient
Operating Temperature ....................-17°C to 50°C
Dimensions
Length...................................................... 401 mm
Width ....................................................... 292 mm
Height ...................................................... 353 mm
Weight ........................................................ 13.5 kg
Usable Oil Reservoir Capacity
at 0° Tip ......................................................... 1.3 l
Maximum Tip Angle ........................................... 34°
Nominal Flow Rate
Low Pressure ......................................... 2.05 l/min
High Pressure ........................................ 0.42 l/min
Optimal Oil Kinematic Viscosity(40°C) ....24.7mm
WARNING
tools,
manual supplied with your charger and battery.

Removing/Inserting the Battery

To remove the battery, open the battery door, push
in the release buttons and pull the battery pack away
from the tool. Close battery door.
WARNING
To insert the battery, open the battery door, slide the
pack into the body of the tool. Make sure it latches
securely into place. Close battery door.
NOTE: For optimal functionality, use M18™
REDLITHIUM
4
1. Beacon Light
2. Mode Lights
3. Auto-Dump Mode Button
4. Hold Pressure Mode Button
5. Wireless Mode Button
6. Manual Release Button
7. Coupler
8. Coupler Swivel
9. ONE-KEY™ Indicator
10. Bluetooth Light
11. Pressure Indicators
12. Light 1 (Wireless Mode)
13. Advance Button
14. Retract Button
15. Light 2 (Wireless Mode)
16. Wireless Power Switch
17. Remote
18. Oil Reservoir Sight Line
19. Battery Bay
20. Oil Fill Cap
21. Cord
22. Cord Wrap
23. Vent
24. Carry/Lifting Handle

SPECIFICATIONS

ASSEMBLY
Recharge
onl
y with
for
the
battery
Always remove battery pack before
changing or removing accessories.
-ION 8.0 Ah battery or higher.
®
(0°F to 122°F)
/s
2
th
e ch
arg
er
.
For
spe
-

Advertisement

Table of Contents
loading

Table of Contents