Table of Contents
Advertisement
/?
This option displays the currently supported command line options.
Example: afdisk /?
Running afdisk
Before you start afdisk, be sure the disk devices you want to format or
partition are physically connected to your PC and are powered. If you
intend to format a removable fixed disk, make sure there is removable
media in the device before running afdisk.
You can view on-line help information for any afdisk screen by pressing
F1. Press Esc to exit the Help screens.
To run afdisk change to the directory where afdisk.exe is located (the
default directory is C:Iadaptec) and enter afdisk to start the program.
Viewing Device Information with showscsi
showscsi is a useful Windows utility that allows you to view information
about all the SCSI devices installed on your system. This utility is copied
to your PCs fixed disk when you run the DOS/WINDOWS DRIVERS
Install program.
Installing showscsi
The most convenient way to use showscsi is to install it as an icon in
Windows. Then you can double-click it at any time to view SCSI device
information. Follow these steps to install showscsi:
1.
Select
Install
DOS/WINDOWS DRIVERS program.
2.
Start Windows and select the program group to which you want to
add the showscsi utility.
3.
Select File/New.
appears, click on OK to add a new program item.
4.
When the Program Item Properties window appears, click on
Browse and change to the directory where the DOS/WINDOWS
DRIVERS files were copied (the default is c:ladaptec.) Double-click
Page 44
ASPI
for
Windows
When the New Program Object window
486MIS System Board User's Manual
when
you
run
the
Advertisement
Table of Contents
