Hyundai Sonata Hybrid 2021 Owner's Manual page 58

Safety System
„ Front
„
„ Rear
„
While the engine is running, push either
of the switches to warm the driver's seat
or front passenger's seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
• Manual temperature control
Each time you push the switch, the
temperature setting of the seat is
changed as follows:
- Front seat
UP
OFF → HIGH (
DOWN ↑ ↓
DOWN
LOW ( ) ← MIDDLE (
DOWN
3-16
ODN8039019
ODN8039022
UP
) → HIGH ( )
) → HIGH ( )
UP
• Automatic temperature control
The seat warmer starts to
automatically control the seat
temperature in order to prevent
low-temperature burns after being
manually turned ON.
- Front seat
OFF → HIGH (
↑
LOW ( ) ← MIDDLE (
60 MIN
- Rear seat (if equipped)
OFF → HIGH (
30 MIN
You may manually press the switch to
increase seat temperature. However, it
soon returns the automatic mode again.
• When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
• The seat warmer defaults to the OFF
position whenever the ignition switch
is in the ON position. However, if the
Auto Comfort Control function is ON,
the driver's seat warmer will turn on
and off depending on the ambient
temperature.
• Auto Comfort Control (for driver's
seat, if equipped)
The seat warmer automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running. If the seat warmer switch
is pushed, the seat warmer will have
to be controlled manually. To use
this function, it must be activated
from the Settings menu in the AVN
system screen. For more information,
refer to the separately supplied Car
Infotainment System manual.
)
↓ 30 MIN
)
) → LOW ( )