Remove The Top Cover From The Node; Remove The Faulted Fan Module - Dell PowerStore 500T Installation And Service Manual

Figure 35. Removing the node
6. Place the node on a clean, flat, static-free work surface.

Remove the top cover from the node

Steps
1. While pushing down the two blue release buttons, slide the top cover towards the rear of the system, until it stops.
2. Lift the top cover upward, and remove it from the node.
Figure 36. Removing the top cover

Remove the faulted fan module

Steps
1. Disconnect the fan module power cable from the motherboard.
34 Base enclosure service procedures