Table of Contents
Advertisement
Figure 17. Install the drive into a drive carrier
Open the system cover
To access the drives, open the system cover:
Steps
1. Loosen the thumbscrews on the rack mount ears and pull out the enclosure from the rack.
2. Loosen the two thumbscrews that attach the system cover to the chassis.
CAUTION:
When you open the system cover, it must be closed within twelve minutes to prevent the
enclosure from overheating.
3. Pull the system cover forward and lift it out of the enclosure.
Figure 18. Open the system cover
20
Installing the enclosure
Advertisement
Table of Contents
Troubleshooting
