Table of Contents
Advertisement
Follow these procedures to add a new base enclosure. For a detailed overview of the base enclosure, see the PowerStore
Hardware Information Guide.
NOTE:
Review the information in
Topics:
•
Install a new base enclosure
Install a new base enclosure
Take the following actions to install a new base enclosure into a rack.
Choose where to install the base enclosure
Before installing the new base enclosure, determine the placement of the new base enclosure within the rack.
Steps
1. Install the base enclosure in the lowest available 2U space, leaving 2U of space at the bottom of the rack for serviceability.
Most cabinets mark 1U increments with horizontal lines or small holes in the channels.
2. If this is the second base enclosure to be installed in the rack, install it directly into the 2U space above the first base
enclosure.
NOTE:
For additional rack space considerations, refer to the PowerStore Planning Guide.
3. Considering these recommendations, choose a 2U space in the cabinet for the base enclosure.
NOTE:
It is recommended that you include 36 inches of clearance in front of and behind the rack to avoid a system
shutdown if maintenance or service activities are required.
Unpack the base enclosure
The base enclosure is a 2U component with 25 2.5" drive slots. Verify that you have received all of the base enclosure
components in the shipping package.
NOTE:
Before installing the base enclosure, ensure that the hardware has acclimated to the operating environment as
described in
Hardware acclimation times
Verify shipping package contents
Confirm that you received all necessary equipment needed to install the new base enclosure.
● Base enclosure - 2U component with 25 2.5" drive slots
● Tool-less rail kit
● Power cords
● SAS cable
● SAS cable label sheet
● Bezel
Install a new base enclosure
Safety precautions for handling replaceable units
on page 54.
on page 53 before handling parts.
Install a new base enclosure
1
7
Hide quick links:
Advertisement
Table of Contents
