Kenwood NX-220 Service Manual page 74

NX-220
Item
Panel tuning mode
10. Single 1) Adj item: [TONE]
Tone Adjust: [✳✳✳✳.]
Deviation Deviation meter
*4 LPF: 15kHz
HPF: OFF
[Narrow] PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide] 1) Adj item: [TONE]
Adjust: [✳✳.✳.✳.]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
11. MSK 1) Adj item: [MSK]
Deviation Adjust: [✳✳✳✳.]
*4 Deviation meter
LPF: 15kHz
[Narrow] HPF: OFF
PTT: ON
Press [ ] key to
store the adjust-
ment value.
[Wide] 1) Adj item: [MSK]
Adjust: [✳✳.✳.✳.]
PTT: ON
Press [ ] key to
store the adjust-
ment value.
12. CW ID 1) Adj item: [CWID]
Deviation Adjust: [✳✳✳✳]
*4 Deviation meter
LPF: 15kHz
[NXDN HPF: OFF
Very PTT: ON
Narrow] Press [ ] key to
store the adjust-
ment value.
*4: Refer to the "Necessary Deviation adjustment item for each signaling and mode" table on pages 76 and 78.
74
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [Single Deviation
Tone Deviation meter
(Analog Narrow)] Oscilloscope
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [Single
Tone Deviation
(Analog Wide)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [MSK
Deviation (Analog
Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [MSK
Deviation (Analog
Wide)]
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
1) Adj item: [CW ID
Deviation (NXDN
Very Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply] but-
ton to store the
adjustment value.
Measurement
Test-
Unit Terminal Unit
Panel ANT Panel
Adjustment
Specifi cations /
Parts Method
[Panel Write the value as 1.50kHz±0.05kHz
tuning followings.
mode] 513 (Reference
Selector value)
[PC test
mode]
[ ],[ ]
3.00kHz±0.05kHz
Write the value as 1.50kHz±0.05kHz
followings.
513 (Reference
value)
3.00kHz±0.05kHz
Write the value as 1.00kHz±0.10kHz
followings.
376 (Reference
value)
Remarks