Connectors Of The Beckhoff C6015 Host Controller - Panasonic MINAS A6 Multi Quick Start Manual

X104 and X12 connectors (DC bus)
Attach the bus bars to X104 and X12 to connect the DC circuits of the power supply module
and the driver module.
Connectors for DC circuits with and without bus bars
X7 connector (for driver configuration)
The driver module is configured using the PC configuration software PANATERM. Use a
commercially available USB A to mini-B cable to connect the PC to the driver module.
(1) X7: USB connector on driver module
Connector X7 for PC connection
3.5

Connectors of the Beckhoff C6015 host controller

The image shows the front view of the host controller. Connector X104 can be used to
connect a monitor. Connectors X105 and X106 can be used to connect a keyboard, mouse
or USB flash drive, if required.
(1) X101: 24V power supply
(2) X102: Ethernet connector
(3) X103: Ethernet connector
(4) X104: DisplayPort connector
(5) X105: USB 2.0 connector
(6) X106: USB 3.0 connector
Front view of Beckhoff C6015 host controller
QS10000_V1.0_EN
(1)
(1)
(2)
(3)
(4)
(5)
(6)
3 Wiring
11