Connectors for DC circuits with and without bus bars
X7 connector (for driver configuration)
The driver module is configured using the PC configuration software PANATERM. Use a
commercially available USB A to mini-B cable to connect the PC to the driver module.
(1) X7: USB connector on driver module
Connector X7 for PC connection
3.5
Connectors of the Omron NX1P2 host controller
The image shows the front view of the host controller.
(2)
(3)
(1) 24V DC power supply
(2) PORT1 EtherNet/IP connector
(3) PORT2 EtherCAT connector
Front view of Omron NX1P2 host controller
24V DC power supply
Connect this connector to 24V DC.
QS10005_V1.0_EN
(1)
(1)
3 Wiring
11