6 Start drive control
3.
Under "Address Info", select "IP Address" and select the "Broadcast Search" button to
display the connected EtherCAT devices.
4.
Select the host controller and select "Add Route".
5.
Enter the login data for the host controller. The default password is "1". Select "OK".
The system is now establishing a connection to the host controller.
6.
Check the connection between your PC and the host controller: An "X" means that the
PC is connected to the host controller. Select "Close" to close the window and confirm
with "OK".
18
QS10000_V1.0_EN