Digital Copier Support - Axis 5570e User Manual

Digital Copier Support

Section 21 Digital Copier Support
Copier Model
Copier Duplex
Copier Staple
Copier Hole Punch
202
The logical printers support the printing options available on digital
copiers and multi-functional printers. It is recommended that you
configure the eight logical printers (PR1-PR8) to allow for eight different
combinations of the following options to suit your printing needs.
For more information on how to configure the logical printers, please
refer to "Logical Printers for Customized Printing" on page 154.
The added functionality includes the following options:
From the drop-down list of supported copiers, select the digital copier
that you have connected the Axis Network Print Server to.
The Axis Network Print Server supports duplex printing i.e. printing on
both sides of the paper. The options in the drop-down list are:
• Off i.e. the duplex printing option is not activated (default).
• Simplex i.e. printing on one side only.
• Long-edge binding i.e. printing on both sides, long-edge first.
Short-edge binding i.e. printing on both sides, short-edge first.
•
The Axis Network Print Server supports stapling with the following
options:
• Off i.e. the stapling option is not activated (default).
• Top left slant i.e. one staple in a slanted position in the top left corner
of the document.
• Top left horizontal i.e. one staple placed horizontally in the top left
corner of the document.
Top left vertical i.e. one staple placed vertically in the top left corner of
•
the document.
• Top 2 i.e. two staples at the top of the document.
• Left 2 i.e. two staples on the left hand side of the document.
• Center 2 i.e. two staples set in the center of the page. This option is
intended for documents printed in A3 format. The staples are placed in
the center of the page where the document is to be folded. Please refer
to the documentation of your digital copier for more information on
these features.
The Axis Network Print Server supports hole punching with the following
options:
• Off i.e. the hole punching option is not activated (default).
• Long-edge i.e. the left hand side of the document.
• Short-edge i.e. the top of the document.
AXIS 5570e / AXIS 5670e User's Manual