Verifying The Communications Link; Amending Device Features - Axis 5570e User Manual

DBCS Support
Important:
Note:

Verifying the Communications Link

Amending Device Features

198
Country PCL Printer Driver
Korea (KS)
Korea (KSSM)
Japan PCL5
China
Taiwan
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the Axis Network Print Server in
the location field and press the Enter key on your keyboard. The internal Web
pages of the Axis Network Print Server will appear.
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a
password (default Pass) in the Root Password field under Admin | General Settings.
3. Click the Configuration Wizard for IBM sessions button.
4. Click the Add Session button. This will start the Configuration Wizard
which is a step-by-step guide through the required IBM configuration
settings.
Default fonts will be changed when switching printer emulations.
Having configured the AS/400 host Axis Network Print Server in
accordance with the above, verify that the communications link is
functioning correctly by following instructions 1-4 detailed in Verifying
the Communication Link, on page 29.
After automatic setup, it may be necessary to change the Device features
and Last Code Point of the printer device. Failure to do so may cause
corruption within your print data.
Follow the instructions below, to set the appropriate Device features and
Last Code Point for your chosen printer device:
Matrix Printer Driver
Epson LQ KS
None
None
Epson LQ 1600K
Epson LQ 1600K
AXIS 5570e / AXIS 5670e User's Manual