Network Speed; Netware Packet Signature Level 1,2,3; Netware Packet Signature Level - Axis 5500 User Manual

Note:

Network Speed

NetWare Packet Signature
Level 1,2,3
AXIS 5500 / AXIS 5550 User's Manual
1. From the print server's internal Web page, select Admin | Logical Printers.
2. Select the PR3 tab.
3. Set the Hex Dump Mode Enabled radio button to YES.
4. Click OK.
The page length for hex dump printouts is determined by the lines per page value of the
PostScript page format parameter.
With the Network Speed parameter you can manually specify the speed at
which you will send and receive network packages. You can change the
Network Speed setting to correspond to the type of network you are using (10
or 100 Mbit).
To change the Network Speed in an Ethernet network, log in to the print
server's internal Web pages and click Admin | General Settings =>Change.
You have the options listed here:

Network Speed

AUTO_SENSE
10_HALF__DX
10_FULL_DX
100_HALF_DX
100_FULL_DX
The default Network Speed value is AUTO_SENSE, which is the correct option
for the majority of users.
If you choose a faulty Network Speed option for your network, you may loose
contact with the print server.
In order to reset the Network Speed parameter to AUTO_SENSE, you will have
to reboot the print server (disconnect and then re-connect the external power
supply).
Protects servers and clients using the NetWare Core Protocol™ services. NCP
packet signature prevents packet forgery by requiring the server and the client
to sign each NCP packet.
Comment
This is the default value where the print server detects which speed is op-
timal for each network package you transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Configuration Possibilities
115