Using Axis Thinwizard Software For Print Server Management - Axis 5500 User Manual

Print Server Management

Using AXIS ThinWizard software for Print Server Management

Installing AXIS
ThinWizard
Note:
Starting AXIS
ThinWizard
88
AXIS ThinWizard software allows you to manage and upgrade multiple Axis
products. Using a standard Web browser, you can find, install, monitor,
configure and upgrade your Axis print servers remotely in any TCP/IP network.
AXIS Thin Wizard 3.0 is Windows 2000 and Windows XP compatible.
AXIS ThinWizard software is available on www.axis.com You should only install
AXIS ThinWizard on a designated computer on your network.
To install, follow the instructions given by the Installation Wizard. During the
installation, you will be asked to enter a user id and a password — these will be
used when logging in to AXIS ThinWizard, so please take a note of them.
To be able to use all AXIS ThinWizard features, the print server must have the FTP_ENB.
parameter set to "Yes". This is done in the print server's web interface: Admin | Network
Settings | Detailed view | TCP/IP
Follow the instructions below to start AXIS ThinWizard:
1. Make sure that the computer where you installed the AXIS ThinWizard is
up and running on your network.
2. Start a Web browser on a client in your network.
3. Enter the IP address or the host name of the computer where you installed
AXIS ThinWizard. (If the server is installed on another port than 80, you must
enter the port name after the host name or the IP address).
4. The AXIS ThinWizard start page now appears in the Web browser. Enter the
user id and password you specified during installation and click Log in.
5. The AXIS ThinWizard interface appears:
Caution!
If you disable SNMP in the print server's web interface, you will disable
AXIS ThinWizard's ability to determine print server status. Disabling/Enabling SNMP is done from
Admin|NetworkSettings|DetailedView|SNMP.
AXIS 5500 / AXIS 5550 User's Manual