Using The Smart Card Reader - VeriFone V210 Installation Manual

Using the Smart
Card Reader
Conducting a Smart
Card Transaction
CAUTION
The Full-Feature Base features the following:
Cable
Ethernet port
RS232 port
USB ports
The smart card transaction procedure can vary depending on the application.
Verify proper procedure with your application provider before performing a smart
card transaction.
Figure 14

Using the Smart Card Reader

To conduct a smart card transaction:
1
Position the smart card with the gold contacts facing upward.
2
Insert the card into the smart card reader slot in a smooth, continuous motion
until it seats firmly.
3
Remove the card when the display indicates the transaction is completed.
Leave the smart card in the card reader until the transaction is completed.
Premature removal can void the transaction.
Configuration
RJ-45 socket (for connecting PINPad to LAN infrastructure)
RS232 socket (for connecting PINPad to LAN infrastructure),
MOD-8 socket, Mini USB & DC-in jack
Mini USB and type A USB
D S
EVICE ETUP
Using the Smart Card Reader
V210 I G
NSTALLATION UIDE
23