Using the Smart
Card Reader
To Conduct a Smart
Card Transaction
Using the
Magnetic Card
Reader
To Conduct a Debit or
Credit card
Transaction
The insert the smart card to proceed with the EMV transaction. EMV supports
credit card and debit card transactions.
1
Position the smart card with the contacts facing upward (see illustration
below).
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
3
Wait for the application to indicate a completed transaction before removing
the card. Premature card removal invalidates the transaction.
Figure 6
Inserting a Smart Card
Use the magnetic stripe reader to perform credit and debit card transactions.
1
Position the card with the magnetic stripe facing backwards.
2
To ensure a proper read of the magnetic swipe card, insert the magnetic card
from the top of the device, as shown in the illustration below.
Figure 7
Using Magnetic Stripe Card
3
Swipe the card through the magnetic card reader.
D
S
EVICE
ETUP
Using the Smart Card Reader
280 I
G
E
NSTALLATION
UIDE
19