CE Conformity
The product Enterasys Wireless Outdoor AP in the version put into circulation by Siemens A&D
conforms to the regulations of the following European directive:
•
99/5/EC
Directive of the European Parliament and of the Council on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity.
Conformity with the basic requirement of the directive is attested by adherence to the
following standards:
•
EN 60950‐1
Safety of information technology equipment
•
EN 301489‐1 V1.6.1
Electromagnetic compatibility for radio equipment and services
•
EN 301489‐17 V1.2.1
Specific requirements for broadband data transmission systems and for equipment in local
high‐performance wireless networks (HIPERLAN)
•
EN 300328 V1.6.1
Electromagnetic compatibility and radio spectrum issues
•
EN 301893 V1.3.1
Broadband radio access networks (BRAN) – 5 GHz high‐performance RLAN
•
EN 50385:2002
Generic standard to demonstrate the compliance of low power electronic and electrical
apparatus with the basic restrictions related to human exposure to electromagnetic fields (110
MHz to 40 GHz)
•
1999/519/EC
Council recommendation on the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz)
Devices connected to the system must meet the relevant safety regulations.
Warning: The Enterasys Wireless Outdoor AP2650 is identical to the EAP-W2-RJ-I2 model and
the Enterasys Wireless Outdoor AP2660 is identical to the EAP-W2-RJ-E2 model. The differences
are in the software that communicate with the Enterasys Wireless Controller. The declaration of
compliance is based on this similarity of hardware models.
Certification
Enterasys Wireless Outdoor AP Installation Guide 5-1
5