Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
2-4-3 Under Tare Status
1. Take the sample off the platter.
The weight of the object on the platter
2. Input the quantity of the sample on the platter.
The weight of the object on the platter
NOTE:
The number of quantity column will flash 6 seconds. If the user doesn't press the
key before flashing is over, the scale will complete the unit weight setting
SAMPLE
procedure automatically after flashing. The scale will also take the number that inputted in
unit weight column as the unit weight of object to calculate the quantity of object shown in
quantity column.
3. Press the
SAMPLE
The weight of the object on the platter
4. After being stable, the scale will finish the sampling and enter into counting mode.
The weight of the object on the platter
NOTES:
The larger quantity of sampling, the more precise unit weight counted out.
When unit weight column and total quantity column both indicate 0, please press
key, and the previous unit weight value will come out.
SAMPLE
Use ZERO and 7 to open or shut display.
03004034
.
.
Input the quantity of sample
key when the number of quantity column is flashing.
.
.
.
The unit weight of object
Stable
The quantity of sample that inputted
22
ZSME200000051
Advertisement
Table of Contents
