Preset Tare Operating Mode - Excell 14key User Manual

EXCELL PRECISION CO., LTD.

3-5-2 Preset tare Operating mode

The scale should be empty, and press number key to input the preset tare value you want,
For example, if you want preset tare 1.00kg, you should input 100
It shows as follows:
Weight
1
The scale should be empty
And there should not be general tare value(Note B)
Press key T , it shows as follows:
Weight
2
The scale should be empty
And there should not be general tare value(Note B)
If not pressing key F within 2 seconds, you will quit the preset tare value of this time and
be back the last preset tare value. (If the last preset tare value is 0), it shows as follows:
Weight
The scale should be empty
And there should not be general tare value(Note B)
If pressing key F within 2 seconds, it shows as follows:
Weight
3
The scale should be empty
And there should not be general tare value(Note B)
At this time, it will occur net and PT light.
To clear preset tare operating mode is as follows:
Press number key 0 to make Unit Price 0, Press key T (The scale should be empty) it
shows as follows:
Weight
1
The scale should be empty
And there should not be general tare value(Note B)
If not pressing key F within 2 seconds, you will quit the preset tare value of this time and
be back the last preset tare value.
Weight
The scale should be empty
And there should not be general tare value(Note B)
If pressing key F within 2 seconds,it shows as follows:
Weight
2
The scale should be empty
And there should not be general tare value(Note B)
At the moment， net and PT light will disappear.
01008044
Unit Price
0.000 1.00
Unit Price
-1.000 preta
Unit Price
0.000 0.00
Unit Price
-1.000 0.00
Unit Price
-1.000 clean
Unit Price
-1.000 0.00
Unit Price
0.000 0.00
Total
0.00
Total
0.00
Total
0.00
Total
- - - - - -
Total
- - - - - -
Total
- - - - - -
Total
0.00
9
ZSME100000117