Operating Modes; Pilot Wire; Comfort - DeLonghi Holmo Fluid Instructions Manual

long beep.

4.2 OPERATING MODES

The appliance provides 5 operating modes
which allow the user to heat the environment
needs.
the desired operating mode. An icon on the
LCD will show the selected operating mode.

Pilot Wire

Night/Eco
Chrono
PILOT WIRE
The temperature depends on the "Pilot Wire" com-
mand.
All "Pilot Wire" commands are enabled.

COMFORT

The "Comfort" temperature corresponds to the
All "Pilot Wire" commands are disabled.
NIGHT/ECO
The "Night/Eco" mode keeps a comfortable tem-
All "Pilot Wire" commands are disabled.
ANTIFREEZE
In the "Anti-freeze" mode the temperature set
the room temperature drops below 7 °C.
All "Pilot Wire" commands are disabled.
CHRONO
tures ("Comfort" and "Night/Eco") over a 24 hour
All "Pilot Wire" commands are disabled.
ting element is on.
Comfort
Anti-freeze
-
-
47
4.2.1 PILOT WIRE
To activate the "Pilot Wire" mode:
appears on the LCD.
on the appliance.
using the following diagram according to the mode set:
Night/Eco
Mode Comfort (Comfort Anti-freeze
-3,5 °C)
Signal to be
transmitted
Voltage
between
Pilot Wire 0 volt 230 volt
Negative
and neutral
wires
4.2.2 COMFORT
The "Comfort" temperature set point is the temperature
appears on the LCD.
The temperature can be choosen in the
interval between 7 °C and 32 °C.
Comfort Comfort
-1 °C -2 °C
230 volt 230 volt
115 volt 115 volt For an For an
Positive interval interval
of 3 s of 7 s
EN
-