Troubleshooting - DeLonghi Holmo Fluid Instructions Manual

7. TROUBLESHOOTING

The appliance does not heat up.
The appliance heats
Leaks of the liquid in the
appliance.
The appliance does not
received from the Pilot Wire
control unit.
The appliance keeps on
heating despite the window is
open and the "Open Window"
function is active.
The appliance does not resume
heating after the window is
closed and the "Open Window"
function is active.
Check the position of the mains switch of the installation.
Increase the temperature set point on the appliance regulator.
Disconnect the appliance from the household mains for a few minutes to reset the
Reduce the temperature set point on the appliance regulator.
Make sure the power of the appliance is adequate for the room to be heated.
vate the function.
ch. 4.3.1 of this booklet.
closing.
Deactivate and activate the function again.
55
EN
-
-