On/Standby Mode; Using The Radiator From The Control Panel; Display - DeLonghi Holmo Fluid Instructions Manual

USING THE RADIATOR FROM THE CONTROL PANEL:

CONTROL PANEL
EN

DISPLAY

Operating modes
Chrono program time bar
Signal transmission from the remote control (if provided) to the radiator.

4.1 ON/STANDBY MODE

operating modes are suspended ("Pilot Wire"
included), but the appliance is powered and
waiting for command reception.
All the
mode and emits a sound.
46
Infrared Receiver
Clock / Temperature set
Chrono temperature Set
Heating element state
To turn the appliance on or off, press the
point