Table of Contents
Advertisement
Quick Links
De'Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com
Proudly distributed by
De'Longhi Australia Pty Limited
P.O. BOX 4540
CASULA MALL NSW 2170
Customer Service Ph: 1800 126 659
Fax: 1800 706932
www.delonghi.com.au
e-mail: info.au@delonghigroup.com
De'Longhi New Zealand Limited
99 Khyber Pass Road
Grafton 1023
Auckland, New Zealand
P.O. Box 58-056 Botany
MANUKAU 2163
Customer Service Ph: 0508 200 300
Fax: 0508 200 301
www.delonghi.co.nz
e-mail: info.nz@delonghigroup.com
Advertisement
Table of Contents
Related Manuals for DeLonghi HX Series
Summary of Contents for DeLonghi HX Series
- Page 1 De’Longhi New Zealand Limited 99 Khyber Pass Road Grafton 1023 Auckland, New Zealand P.O. Box 58-056 Botany MANUKAU 2163 Customer Service Ph: 0508 200 300 Fax: 0508 200 301 www.delonghi.co.nz e-mail: info.nz@delonghigroup.com De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
- Page 2 HX Series CONVECTOR Instructions for use...
- Page 3 40 cm 46 cm (min.) 20 cm 60 cm (min.) 80 cm 20 cm...
-
Page 4: Important Safeguards
IMPORTANT SAFEGUARDS Danger of burns!! Safety warnings Failure to observe the warning could result in burns or scalds. - WARNING: To avoid overheating, Danger! never under any circumstances Failure to observe the warning may result in life threatening inju- cover the appliance during ry by electric shock. -
Page 5: General Instructions
caused by the protective substances Disposing of the appliance The appliance must not be disposed of with household applied to the heating element before waste, but taken to an authorised waste separation and transport and is completely normal. recycling centre. - Position the appliance in such a way that the plug and socket are easily accessible. -
Page 6: Operation And Use
Before installing the unit , make sure of the following: automatically at power level 2 even if power level 3 has been a. The appliance must not be located directly beneath selected. Once the room temperature is higher than -5°C, the a current outlet. -
Page 7: Technical Characteristics
mode press buttons + and - together for at least 3 seconds. The TECHNICAL CHARACTERISTICS display shows the symbol and a double acoustic signal will Supply voltage See rating label be emitted. To deactivate the function proceed in the same way. Absorbed power “... -
Page 8: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION The appliance doesn't work Be sure it is plugged in and that the electrical Plug into the power outlet outlet is working The temperature may be set too low Set the temperature higher The Key lock may be activated See the section "Key lock"...