Settings Of Sample Screen - Mitsubishi FR-E800 Series Sample Screen Manual

7.3.3

Settings of Sample Screen

When connecting the GOT to the inverter in RS-485 connection, the minimum station number can be set in the
inverter is "0".
When communicating with the station number "0", the setting of the object which displays the axis name*1 is
required to be changed.
How to change the setting is shown below.
(1) Axis name
Regarding the display of axis name, the axis name of comment No. same as the selected station number is
displayed.
Although the minimum station number is "0" in RS-485 connection, the minimum comment No. is "1". Therefore the
comment No. obtained by the value of station number + 1 is required to be referred.
Example: Change the settings of the object which displays the axis name in [Parameter (List)] screen (B-12100).
*1: Please refer to "5.4 Comment "for axis name.
(2) Station Number Switching
In this sample screen, station No. can be switched between 1 and 16 in the default setting. When switching to the
number other than 1 to 16 such as station number 0, please refer to "7.7 C
Station No.
" and change the settings according to the system configuration.
Set "1" to the value of [Constant] for
the value of station number +1.
hanging the Inverter Network No. and
65/79
Open [Operation/Script] tab.
Set [Data Expression] to [Data
Operation] and edit the data
expression in [Exp]
BCN-P5999-1305-1c