Local Administrative Options Using The Telephone Dialpad - Avaya one-X 1603 Administrator's Manual

Administering Telephone Options
Standalone telephone (Telephone Only Authenticates) - When the IP telephone is
●
configured for Supplicant Mode (DOT1X=2), the telephone can support authentication
from the switch.
Telephone with attached PC (Telephone Only Authenticates) - When the IP telephone
●
is configured for Supplicant Mode (DOT1X=2), the telephone can support authentication
from the switch. The attached PC in this scenario gains access to the network without
being authenticated.
Telephone with attached PC (PC Only Authenticates) - When the IP telephone is
●
configured for Pass-Through Mode or Pass-Through Mode with Logoff (DOT1X=0 or 1),
an attached PC running 802.1X supplicant software can be authenticated by the data
switch. The telephone in this scenario gains access to the network without being
authenticated.
Some switches support authentication of multiple devices connected through a single switch
port. This is known as multi-supplicant or MAC-based operation. These switches typically send
unicast 802.1X packets to authenticating devices. These switches support the following two
scenarios:
Standalone telephone (Telephone Only Authenticates) - When the IP telephone is
●
configured for Supplicant Mode (DOT1X=2), the telephone can support authentication
from the switch.
Telephone and PC Dual Authentication - Both the IP telephone and the connected PC
●
can support 802.1X authentication from the switch. The IP telephone may be configured
for Pass-Through Mode or Pass-Through Mode with Logoff (DOT1X=0 or 1). The attached
PC must be running 802.1X supplicant software.

Local Administrative Options Using the Telephone Dialpad

The local procedures you use most often as an administrator are:
CLEAR - Remove all administered values, user-specified data, option settings, etc. and
●
return a telephone to its initial "out of the box" default values.
DEBUG - Enable or disable debug mode for the button module serial port.
●
GROUP - Set the group identifier on a per-phone basis.
●
RESET - Reset all system values and system initialization values except AUTH, NVAUTH,
●
registration extension, and password to the default values. Also resets the 802.1X identity
and password to the default values.
VIEW - Review the 1600 IP Telephone system parameters to verify current values and file
●
versions.
Ethernet (Hub) Interface Enable/Disable - Enable or disable the Ethernet hub locally.
●
72 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0