Telephone Initialization Process; Step 1: Telephone To Network - Avaya one-X 1603 Administrator's Manual

Administration Overview and Requirements
Table 2: Administrative Checklist (continued)
Task
Administer telephones
locally as applicable
Installation of
telephones in the
network
Allow user to modify
Options, if applicable

Telephone Initialization Process

These steps offer a high-level description of the information exchanged when the telephone
initializes and registers. This description assumes that all equipment is properly administered
ahead of time. This description can help you understand how the 1600 Series IP Telephones
relate to the routers and servers in your network.

Step 1: Telephone to Network

The telephone is appropriately installed and powered. After a short initialization process, the
telephone identifies the LAN speed and sends a message out into the network, identifying itself
and requesting further information. A router on the network receives and relays this message to
the appropriate DHCP server if the phone IP address is 0.0.0.0.
18 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0
Description
As a Group:
Individually:
For More Information See:
The GROUP System Value
page 59 and the Avaya one-X™
Deskphone Value Edition 1600
IP Telephone Installation and
Maintenance Guide.
The applicable Local
Procedures in the Avaya
one-X™ Deskphone Value
Edition 1600 IP Telephone
Installation and Maintenance
Guide.
Avaya one-X™ Deskphone
Value Edition 1600 IP
Telephone Installation and
Maintenance Guide.
OPSTAT on page 64 and the
respective User Guide for the
specific telephone model.
on
2 of 2