Avaya 6424D+M User Manual page 15

At the CMD: prompt, type dial and the telephone number.
2
For example, type dial 5551212 .
Note: When dialing, type: dial ; then one (and only one) space; then the number. Strict
adherence to this format is necessary. For example, typing dial , two spaces, and
the string results in the second space being transmitted as the first character in the
dialed string.
Press .
3
RETURN
CALLING 1234567
Type E to end call:
Supplementary circuit switched data features may require the entry of additional dialing
information prior to the receipt of the CONNECT message. To facilitate the use of these
features, the ADM allows you to enter additional dial commands before the CONNECT
message Depending upon the network's response to the initial dialed digits, you may or
may not receive a CONTINUE message after the initial dial command.
Additional information may appear on your screen, such as:
CONNECT - MODE 2
FAR END SPEED - 9600
OR
CONNECT
DATA MODE
Once you see the CONNECT message, you should ignore the Type E to end call.
You are now ready to communicate with the far end. Enter data to be transmitted.
To end a data call, do one of the following:
4
press the
DATA/SEND/OFF
OR
rapidly type the Attention sequence: +++ (see the description of the Attention option in
Chapter 4, Data Options and Profiles).
The CMD: prompt is displayed.
Type e or end to end the call.
To redial the last data call, at the CMD: prompt, type redial followed by
5
button
.
RETURN
Getting Started 2-7