Install The Diskette Drive; Removing The Diskette Drive Carrier - Intel SC5000 Subassembly Product Manual

Install the Diskette Drive

NOTE
We highly recommend you use a magnetic screwdriver for this step. A
nonmagnetic screwdriver may lose the screws between the chassis and the
plastic bezel.
1. Using a magnetic screwdriver, remove the two screws that hold the diskette drive carrier to the
front of the chassis.
2. Slide the carrier towards the rear of the chassis, until it comes free.
22
Figure 11. Removing the Diskette Drive Carrier
Intel SC5000 Server Chassis Subassembly Product Guide
OM09177