Installing A Carrier - Intel SC5000 Subassembly Product Manual

11. Slide the carrier into the chassis.
12. Insert and tighten the screws removed in Step 1.
13. Attach data and power cables to the drive. You must use the power plugs labeled P6 and P7 to
connect to drives in the bottom two carriers. Use the plugs labeled P11 and P12 to connect to
drives in the next two carriers or to the hot swap bay.
Setting Up the Chassis
B
A
Figure 19. Installing a Carrier
A. Data cable
B. Power cable
OM09179
31