Standard And Optional Hot Swap Drive Bays; Inch Half-Height Peripheral Bays; Figure 2. Tool-Less Rails Mounting 5.25-Inch Cdrom Drive - Intel SC5300BRP Technical Product Specification

Intel® Server Chassis SC5300 5U Kit TPS
2.5

Standard and Optional Hot Swap Drive Bays

One fixed bay, supporting six cabled drives, ships with the standard chassis. An optional four-
drive bay for cabled (fixed) drives is available. Optional four- and six-drive hot swap bays are
also available and may be installed to replace either the six- or four-drive fixed bays. No tools
are required to replace the fixed drive bays. An optional six drive hot swap SATA/SAS bay is
also available. See the appendix for a full list of accessories.
2.6

5.25-inch Half-height Peripheral Bays

Three 5.25-inch, half-height drive bays are available for installation of a floppy drive, CD-ROM
drive or tape drive. The chassis ships with a 3.5-inch floppy or fixed drive carrier installed in the
top 5.25-inch drive bay and two empty 5.25-inch drive bays. Tool-less mounting rails are
included for all three drive bays and attach without screws.

Figure 2. Tool-less Rails Mounting 5.25-inch CDROM Drive

Revision 1.31
Chassis Features
TP00895
19